Ways to Make Certain Your Solar Panels Operate at Its Optimum
If your solar panels operate at their optimum efficiency, you will be in a position to receive much more electrical energy. Otherwise you will have to suffer a longer payback period for your investment.
There a few easy methods to make certain you are getting the most out of your solar investment. All these involve the efficiency of your PV panels. I have summarized the most essential points for you here:
1. Use higher-efficiency PV panels
Even though this is not precisely a way to make certain your PV panels are operating at their maximum efficiency, it is essential. When you select the right PV panels, much more than half the battle is won. Some PV panels are inexpensive, but they do not yield a lot of electrical energy per square foot. Therefore you have to punch the figures into your calculator and make sure you are obtaining the least expensive electricity with the most dependable manufacturer. Dirt-cheap solar panels might finish up being the most expensive ones in disguise.
2. Keep your PV panels clean
By maintaining your PV panels clean, you are permitting much more sunlight on your solar cells. This is good, simply because with much more light, more electrical energy can be generated. Photovoltaic panels with dust, dirt and leaf on it trigger shading. These panels are most likely generating about 80 percent of that they are capable of. Simply by washing the dirt away, you can increase your power production by 20 %.
3. Cool your solar panels
Solar cells reduce in overall performance as they improve in temperature. Such is the nature of numerous semiconductors. Sadly as the sun shines on your solar panels, they inevitably get heated up. What you can do is to leave at least six inches of air gap between the roof and the solar panels so that air can move freely to take away excess heat from the solar power panels. You can also install other cooling devices to help maintain your PV panels cool.
4. Point your PV panels to the right path
It is important to tilt your solar panels southwards so that they can catch as much sunlight as possible. This is true for those of us who live in the northern hemisphere. If sunlight shines on the solar panels at an angle, the illumination would not be as intense as when it shines squarely on the photovoltaic panel surface. For industrial solar panels, investing in a solar tracker may assist to recover a lot of power that would otherwise be lost. These devices help solar panels to follow the sun. This guarantees that incident rays are always perpendicular to the surface of the panel.
5. Use the right kind of wires
Even if PV panels are operating at their best, power can be lost if unsuitable wires are used. This is simply because if the wires are too thin, resistance converts a big portion of your solar electricity into heat. Thus it is crucial to use the correct type of wires.
