Making A Tin Can Luminary
This year I made a decision to make luminaries for Xmas. You can choose any simple design to transfer onto your tin can. I used a favorite clipart program on my computer to consider simple Christmas types to print out. This surprising Go Luminary Bags Launches New Designs Onto Amazon portfolio has a myriad of staggering warnings for the purpose of it. Discover more on Go Luminary Bags Launches New Designs Onto Amazon by browsing our splendid paper. I chose a Xmas tree, a...
A tin can luminary is just a fun, simple craft project for all ages. They're only limited by your imagination and perfect for any holiday! You can transfer any simple design onto a tin can to produce a lovely candle holder for any event.
This season I thought we would make luminaries for Xmas. You can choose any basic design to move onto your tin can. I used a favorite clipart program on my computer to consider simple Christmas designs to print out. I chose a Xmas tree, a snow-man, and a pair of gingerbread men.
Here's what you need to get started:
Empty tin cans (washed and labels removed)
Style to shift onto can
Hammer
Large nail
Record
Bowl towel
If you freeze some water in it It is best to punch the holes in your tin can first. Fill the can with water, leaving 1/4 inch space at the very top for that ice to grow. Place in freezer until frozen. Your can may bulge only a little at the bottom while in the fridge, but after you remove the snow you can use the hammer to flatten out the bottom of the can.
You might want to freeze a couple more cups then you think you'll need in-case you make an error and have to start once again.
After the snow has frozen, take the tin can from the freezer and record your style for the can. I used supplying tape, however you may also use duct tape. The tape won't stick to the cold can, however you can cover the tape all the way around the can so it will stick to the report.
If you do not have a design on paper, you can also draw a design on the can freehand with a permanent marker. You can even just strike the design freehand without pulling it first.
Set the can on a folded dish towel therefore the towel may get the ice-chips that try to escape. It'll also support the can in place. Utilizing the hammer and nail, touch holes around the line of one's design, attempting to punch holes equally and perhaps not too close together. You want a straightforward design so that when you see only the holes in the can you'll be able to tell what it is!
After punching the holes, eliminate the record and paper and admire your design. It's really so easy! Also punch two holes at the top of the can, If you plan to hold your luminary. You may make a handle out of wire (from the art store) or a wire coat hanger.
Place the tin can under running warm water to melt the ice. Dry the can with a towel and position a votive candle in the bottom. You will require a lighter or match to light the candle.
To help decorate your tin can luminary, you can spray paint the can any color you wish. Be creative!
This can be a good family project. Just make sure kiddies have adult supervision while using the hammer and nails. Have fun!
Photos of done project:
